Ta-triumph-adler 206ci User Manual download pdf (Page 352)

100

101

11-4

Appendix > Optional Equipment

Remove the covers.

Replace the memory module.

1 Carefully push the two socket clamps straight up out of the socket, and remove the

memory module.

2 Remove the memory module from its package.

3 With the memory connection terminal pointing toward the socket, align the cut-out part with

the socket terminal and insert directly in at an angle.

4 Carefully press the inserted memory down and into the machine.

5 Reinstall the covers.

Removing the Memory Module

To remove a memory module, remove the right cover and the memory slot cover from the machine. Then, carefully push

out the two socket clamps. Ease the memory module out of the socket to remove.

Verifying the Expanded Memory

If not correctly installed, the error message “Machine failure” will appear. Re-install. To verify that the memory module is

working properly, test it by printing a status page.

Refer to Report on page 9-5.

Card Authentication Kit (B)

User login administration can be performed using IC cards. To do so, it is necessary to register IC card information on

the previously registered local user list. For more information about how to register this information, refer to the IC Card

Authentication Kit Operation Guide.

IMPORTANT

Before inserting a memory module in the machine, make sure that the machine is

switched off.

1 2 ... 347 348 349 350 351 352 353 354 355 356 357 ... 381 382

Comments to this Manuals

No comments

Ta-triumph-adler 206ci User Manual Page 352

Comments to this Manuals

Related products and manuals for Copiers Ta-triumph-adler 206ci